Introduction
+
Dimming glass is a new type of special photoelectric glass which combines the liquid crystal film into two layers of glass and has a sandwich structure with high temperature and high pressure. The user controls the transparent and opaque state of the glass by controlling the on-off of the current to replace the curtain.The glass itself not only has all the characteristics of safety glass, but also have privacy control glass transparent, because of the characteristics of the liquid crystal film layer, dimming glass can also be used as a substitute for common screen, projection screen, high-definition screen image appears on the glass.
When the dimming glass off the power, liquid crystal molecules appears to irregular scattered state, the dimming glass will be unclear but could transmit light; when the dimming glass is energized, liquid crystal molecules inside will arrange in a row orderly, light penetrate freely, the dimming glass instantly rendering transparent state.
Performance characteristics:
Privacy protection: The biggest function of intelligent dimming glass is privacy protection, you can control the transparency or opaque state at any time;
Projection function: intelligent dimming glass is also a very good projection hard screen, in the light of suitable environment, if we use the high lumen projector, projection imaging effect is very clear, outstanding;
It has the advantages of safety glass, including safety performance of preventing debris from splashing after break and good impact resistance;
4.Environmental protection: Dimming film and film between the dimming glass could heat insulation, obstruct more than 99% ultraviolet ray and 98% infrared ray. It could shield part of the infrared to reduce heat radiation and transmission. And shielding UV, can protect the indoor furnishings due to ultraviolet radiation and fade, aging and so on.
5.Sound insulation characteristics: Dimming of plastic sheeting and film in the middle of the dimming glass can block sound,and block partial sound.
Product specifications and usage parameters:
Product specification: customized according to requirements;
Glass thickness: 5.5mm ~ 40.5mm
Interlayer thickness: 1.5mm
Drilling and cut-out: available
Storage temperature: -20℃~60℃;
Operating temperature: -10℃~50℃
Operating voltage: 24VAC, 48VAC or 65VAC;
Transmittance: about 75%;
Privacy distance: shield any image which is 3cm far away from the other side of the glass;
Visual angle: about 140°;
The average energy consumption: about 5W/ hour/ square meters;
Normal lifetime: over 10 years;
Implement technical quality standards:
Complying with European standards:EN12150-2:2004;
Australian standard: AS/NZS 2208-1996;
America standards:ANSI Z97.1-2004;
China standard: GB15763.2-2005;